Aico EI1529RC Hardwired Smoke Alarm Remote Test, Hush & Locate Switch , White

Product Information

Please let us know should you like to discuss anything and we’ll get you in touch with an electrician who can provide a professional advice! Easy to install using a 3 wire connection (Live, Neutral and Interconnect/Control) as standard smoke/heat alarm wiring Test Switch: Allows the user to test all the interconnected Alarms at once from a convenient point rather than having to press the test button on each Alarm. Remote test and hush switch specifically designed for use with the Ei161RC, Ei164RC or Ei166RC, and with the Ei2110 series. Aico EI1529RC Mains Powered Remote Control Switch - functions

The Ei1529RC is a remote control switch that runs on 230V AC mains power. It is designed for use with 2100, 160RC and 140RC series smoke and heat alarms, and 260RC series carbon monoxide alarms. Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive) Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms The use of the remote control switch increases the flexibility and ease of use of these alarms by allowing the alarms to be located, silences and tested remotely.Hush Momentarily pressing the Hush button switch allows remote silencing of false alarms. The system will reset automatically after approximately 10 minutes. In the unlikely event that a fire should occur during the Hush period the feature will be overridden when sufficient smoke has entered the sensor chamber of the smoke alarms in the system, or sufficient CO has entered the sensor of the CO alarms in the system. Note: The Hush feature will not operate if the CO alarm is sensing CO levels of 300ppm or above due to the increased danger. I have used Fastlec three times each time I have found them to be efficient fast and happy to give you information on their products." Hush, silence the alarm: Will silence nuisance alarms for approximately 10 minutes before automatically resetting

The Ei1529RC is a wall mounted Remote Control device powered by 230V AC. It is recommended for use in systems comprising of three or more hardwired interconnected mains Alarms. Locate Switch: If the Alarms are sounding, pressing the Locate Switch silences all but the originating Alarm, thus allowing easy identification of the source of the alarm. Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms. Silence Switch: Allows the user to silence all interconnected Alarms at once for 10 minutes in case of false alarm.If you have a fire alarm system comprised of three or more interconnected smoke/heat alarms, it can be useful to keep a remote test and hush switch to hand. The Aico Ei1529RC is designed specifically for use with the Aico Ei160 series of smoke and heat alarms: the Ei161RC ionisation detector, Ei164RC heat detector and the Ei166RC optical detector. Ideal for elderly or vulnerable users, the wall-mounted switch tests, locates or silences your interconnected smoke alarms from an easily accesible low-level position. This item is guaranteed for five years.

The EI1529RC from Aico is a mains, 230V, powered remote control switch for use with their 2100 and 160RC series of smoke and heat alarms and with the 260 series of carbon monoxide alarms.Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system. The wall mounted switch unit can locate the initial source of an alarm, silence any false alarms and test all the alarms in the system. The control unit is mains powered and interlinks via hardwire connection with the majority of Ei Electronics and Aico products, including carbon monoxide alarms. These switches are highly recommended for systems with a mixture of smoke, heat, and carbon monoxide alarms so that occupants can identify the source of the alarm and take the appropriate action depending on the type of emergency. The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes Wall mounted for ease of use can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied). All alarms on the system will sound. This is the equivalent of pressing the test button on each individual alarm

Our goal is to provide one stop place for electricians and electrical contractors, but we are happy to help other clients too. It increases the flexibility and user friendliness of the alarms by allows the user to remotely ‘Locate, Hugh and Test’ the alarms in the system: Compatible with 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms, 140RC Series alarms and hard wired interconnected Carbon Monoxide alarms Add to quote” – this option allows to you gather items together and ask us for a no obligation quote. We’ll do our best to improve our already competitive prices where possible. Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives.

Pricing & Availability

Locate, identify a triggered alarm: The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes